Tankless-Water-Heater

TANKLESS
WATER HEATERS
Models & Prices

Tankless Water Heater Product Guide
Description / Specification

Tankless Water Heater Applications
Residential / Commercial

Tankless Water Heater Electrical Guide
Service Calculations

Tankless Water Heater Installation
Plumbing / Electrical

Tankless Water Heater Cost Comparisons
Reports / Listings

Tankless Water Heaters Service Guide
Remove / Repair

SEND TO A FRIEND

HIGH LIMIT SWITCH REPLACEMENT
There are two high limit switches located near the top of chambers 1 and 3 in line across with thermistors TH1 and TH3. There are two brown wires connected to each high limit switch.

Figure: High limit switch, reset button shown in the middle between the two spade connectors.

Remove the two brown wires with needle nose pliers and use the same tools and procedure above that are described for TH1 through TH4 thermistor replacement. Again, only tighten the high limit switch to 14 in.-lbs. (same tightening torque as the thermistors)

Home || Tankless Company Introduction || Tankless Patent Information || Tankless Distribution || Contact Us & LINKS ||
Tankless Product Information || Tankless Application || Tankless Tankless Water Heater Installation || Trouble Shooting || Buy On Line